HowYouCanDoItToo
HowYouCanDoItToo
  • Видео 220
  • Просмотров 5 169 364
Side by Side Won’t Start One Click is Fixed
Hisun 500 starting problems solved. This video should work with most side by sides. I only try to help people and do my best to explain to help others in similar situations. Thank you for your time and support it means the world to me helping when I can, Tony
Просмотров: 45

Видео

Easy Heater Core Fix Broke Leaking Hose
Просмотров 384 месяца назад
Heater Core hose leak and broke hose connection to heater core. Massive steam coming from engine and temperature gauge maxed out. I had a hole in heater core hose. When I tried replacing it I snapped the heater core tube off. So I had to bypass the heater core until I can fix heater core. To replace the heater core tubes was a massive task for me not being a mechanic. So I just added an adapter...
Target Trap Filler Part 3 #target #diy #sports
Просмотров 46Год назад
Target Trap Filler Part 3 #target #diy #sports
Target Trap Box Part 2 #target #diy #sports
Просмотров 30Год назад
Target Trap Box Part 2 #target #diy #sports
Target Trap Stand Part 1 #target #diy #sports
Просмотров 30Год назад
Target Trap Stand Part 1 #target #diy #sports
My Target Backstop #fun #sport #diy
Просмотров 38Год назад
My Target Backstop #fun #sport #diy
My Backyard Target Range Preview
Просмотров 51Год назад
My Backyard Target Range Preview
Easy DIY Craftsman Riding Mower Oil Change
Просмотров 3,4 тыс.Год назад
Easy DIY Craftsman Riding Mower Oil Change
Swing Hanger for 4X6 Easy Install #diy #howto #video
Просмотров 508Год назад
Swing Hanger for 4X6 Easy Install #diy #howto #video
How to change a circular saw blade easily #diy #howto #video
Просмотров 41Год назад
How to change a circular saw blade easily #diy #howto #video
Honeywell ProSeries Thermostat Battery Change
Просмотров 30 тыс.Год назад
Honeywell ProSeries Thermostat Battery Change
Dog Cat Surgery Recovery Suit
Просмотров 8232 года назад
Dog Cat Surgery Recovery Suit
Easiest Way To Move Recliner Couch!
Просмотров 17 тыс.2 года назад
Easiest Way To Move Recliner Couch!
XRP If You Were A King For A Day
Просмотров 1112 года назад
XRP If You Were A King For A Day
Stringline Roller
Просмотров 752 года назад
Stringline Roller
Riding Mower Fuel Tank Leak Repair / For Generator Too Quick And Easy
Просмотров 7 тыс.2 года назад
Riding Mower Fuel Tank Leak Repair / For Generator Too Quick And Easy
Gas In Oil Lawn Mower Check This First!!!
Просмотров 11 тыс.3 года назад
Gas In Oil Lawn Mower Check This First!!!
UTV / ATV Drag Mat For Dirt Roads! Better than Chainlink Fence!
Просмотров 6 тыс.3 года назад
UTV / ATV Drag Mat For Dirt Roads! Better than Chainlink Fence!
2002 Nissan Intermittent No Start One Click Fixed
Просмотров 1,3 тыс.3 года назад
2002 Nissan Intermittent No Start One Click Fixed
Black Boar ATV UTV Multi-Hitch
Просмотров 1,6 тыс.3 года назад
Black Boar ATV UTV Multi-Hitch
Dog Cone Care Tips
Просмотров 35 тыс.3 года назад
Dog Cone Care Tips
Remove Glue / Sticker Residue Off Plexiglass Or Plastic Safely
Просмотров 8 тыс.3 года назад
Remove Glue / Sticker Residue Off Plexiglass Or Plastic Safely
Drill A Level Hole Easily
Просмотров 11 тыс.3 года назад
Drill A Level Hole Easily
Easy Crankshaft Pulley Lock Torque/Removal
Просмотров 220 тыс.3 года назад
Easy Crankshaft Pulley Lock Torque/Removal
Poulan PLN3516F Electric Chainsaw Blade Replacement
Просмотров 12 тыс.3 года назад
Poulan PLN3516F Electric Chainsaw Blade Replacement
DIY Large Portable Watering Can!!!
Просмотров 3654 года назад
DIY Large Portable Watering Can!!!
Finish Nailer Leaking Air???
Просмотров 17 тыс.4 года назад
Finish Nailer Leaking Air???
Fix Holes Too Big For Screw
Просмотров 40 тыс.4 года назад
Fix Holes Too Big For Screw
Cheap Industrial Weed Block!!!
Просмотров 2574 года назад
Cheap Industrial Weed Block!!!
How To Repair Extension Cord Ends Step by Step
Просмотров 5304 года назад
How To Repair Extension Cord Ends Step by Step

Комментарии

  • @celticmulato2609
    @celticmulato2609 4 часа назад

    Thanks 😊

  • @bronstontodachine6512
    @bronstontodachine6512 2 дня назад

    Cool it worked thank you……..

    • @HowYouCanDoItToo
      @HowYouCanDoItToo День назад

      Awesome!!! Thank you for letting me know it helped you means a lot! Have a great day, Tony

  • @ohangus5
    @ohangus5 5 дней назад

    I think theres steam?? Blow a hose or belt?

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 4 дня назад

      You got it! Hose with possible a whole lot more it was boiling in block and no oil!!! Will find out in a couple days when I can take time. You have an awesome day, Tony

  • @traceybellucci1845
    @traceybellucci1845 5 дней назад

    Thank you, thank you, thank you. I was so nervous, I was worried I would mess it up. After watching your video, I did it myself! I'm glad I didn't have to ask someone to come and do it for me. Thank you again! Tracey :)

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 5 дней назад

      Thank you so much for letting me know you made my day!!! This is why I do these videos. You have an awesome evening, Tony

  • @karaelvin9906
    @karaelvin9906 7 дней назад

    Snake?

  • @Noteflight18
    @Noteflight18 7 дней назад

    Idk

  • @proepoxyfloors2814
    @proepoxyfloors2814 7 дней назад

    Idk

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 7 дней назад

      😂 if you don’t know, then you don’t know. I don’t even know if I know now! Have a great weekend, Tony

  • @samanthafidler9507
    @samanthafidler9507 7 дней назад

    Great job to you and your excellent camera man!!🎉

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 7 дней назад

      Thank you so much!!! I will pass this on to Duce he is like 6’6” now. He’s more like a boom camera man now 😂 Have an awesome weekend, Tony

  • @chaneejackson
    @chaneejackson 8 дней назад

    This was right on time , thank you so much!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 8 дней назад

      Awesome!!! I hope this definitely helped you that is why I try and post videos to help others. Have an awesome day, Tony

  • @leolopy
    @leolopy 11 дней назад

    Dude!!! 2024 worked today for me. Thanks a Lot Master!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 11 дней назад

      Awesome!!! Thank you for letting me know it means a lot. Take care, Tony

  • @SAH.MARQUETTE
    @SAH.MARQUETTE 11 дней назад

    Thank you so much!!!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 11 дней назад

      You are so welcome! Thank you for letting me know. Have an amazing week, Tony

  • @mammsiegraham
    @mammsiegraham 13 дней назад

    Your a great teacher my brother

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 12 дней назад

      Mammsie!!! Thank you brother you made my day just hearing from you!

  • @DAROZAWOODWORKING
    @DAROZAWOODWORKING 13 дней назад

    Good job don't you love when things work out . Hey let me know when you get a new multi meter so I can borrow it.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 13 дней назад

      Thank you 😂 I will definitely let you know when I get a new multi meter 😂

  • @kevinderiso4210
    @kevinderiso4210 15 дней назад

    This is absolutely great 😅

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 15 дней назад

      Thank you so much for the compliment it means a lot to me 😊 You have an awesome day, Tony

  • @FailFunnieTV
    @FailFunnieTV 16 дней назад

    How we going pass that fly by ,by a big bug

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 15 дней назад

      😂 I had to watch and listen for the fly by 😂 Sure enough I heard it and laughed my off 😂 You have an awesome day and thank you for the much needed laugh, Tony

  • @federalagent7334
    @federalagent7334 17 дней назад

    Sadly, this only works in the cases where you can take off the tops of your faucet handles...

  • @Kamawah
    @Kamawah 23 дня назад

    This doesn't work on my 2012 Honda Ody. The only thing you can get down the dip stick tube is the dip stick by turning it until it drops in.

  • @user-em7ps5mk2q
    @user-em7ps5mk2q 27 дней назад

    That was exallent!!!Thank you.I cant tell you how great that was real inventive !Thanks again.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 26 дней назад

      So glad this video helped you!!! Thank you for letting me know. I hope you have an amazing day, Tony

  • @littlebeebs1
    @littlebeebs1 Месяц назад

    So after I remove the rails , each section comes off ? Thank you ! 😊

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 29 дней назад

      Yes. So far unless they take the easy back away from us 😂 Have an awesome day and I hope this helped. Tony

  • @jackieashley9948
    @jackieashley9948 Месяц назад

    Ahh ypu should of use a shovel this here take too long to get out of the truck

  • @monchy25
    @monchy25 Месяц назад

    Why keep calling it “idiot light”? Is the oil pressure warning light, “tattletale” light 😂😂😂

  • @suzem343
    @suzem343 Месяц назад

    Thank you sooooo much for this video!!! 😘😘😘 We have this exact model and used your directions - perfect!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      That is so awesome!!! I’m happy this video helped you!!! Have an amazing weekend, Tony

  • @benluoma9363
    @benluoma9363 Месяц назад

    Thank you! BIG help for me!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      I’m so glad this helped you and Thank you for letting me know, Tony

  • @97warlock
    @97warlock Месяц назад

    I will be doing my timing belt in 2 days. ...This is useful info since I dont have an Impact & will be wrenching it.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Hoping you much success and this method helps you. If you do notice it slipping try using more wraps if you can until it grabs. Some people in the thread added a piece of rubber that helped too. But usually a good tight wrap works for me. Take care, Tony

  • @othername1000
    @othername1000 Месяц назад

    Yeah, you wasted my time. I’ve got the parts. I need to rebuild another one too. And it’s been a while. And I don’t know what I did with the playlist of videos. Somehow, RUclips listed this video second in search results And you jerked me around for two minutes. You got the thing apart, you got the parts and installed them, You’ve got a video camera, and it appears you like to , but instead of a two minute rebuild, you decided to talk for two minutes and then just leave.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Yes I spent two minutes so people wouldn’t buy the parts and realize the parts they got didn’t work and spent hours and can go by another cheap one like most home owners buy cheaper than wasted more time and money! So yes hopefully you won’t waste more than two minutes of your time on something that cost you more to fix than what it’s worth. People like me are truly trying to help people out. If you have more patience when you are teaching someone you know what not to do and think two minutes is too long for your precious time. Maybe you should of took two minutes to realize where you saved your playlist 😂

  • @ExtremeRecluse
    @ExtremeRecluse Месяц назад

    I have the same saw. A snap ring keeps the chain from slipping off of the sprocket. Mine broke in half. Luckily, I have a drawer full of them at work.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Thank you so much for this information I will definitely check that out if mine does that. I still have it and going strong. You have an awesome day, Tony

  • @samuelsanchez8212
    @samuelsanchez8212 Месяц назад

    Good afternoon I just would like to say that yes there's many videos out there but the close up that you did with the video to make sure nothing gets messed up is truly appreciated I got one for a friend of mine that had some trees that she needs to get cut down and it was used it's the pL1416 model and the chain is kind of wore out I was trying to figure out how to change the chain thank you so much I truly appreciate God bless it's a excellent video thank you so much for sharing this

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Thank you so much for letting me know! It means a lot to me if I can help people in small ways. You taking the time to comment makes me smile inside. You have blessed day, Tony

  • @vhpconsulting
    @vhpconsulting Месяц назад

    Thank you my friend for posting how to do it. Your explanation was GREAT and to the point. I did under 2 minutes. Blessings

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Awesome!!! So happy this helped you and means a lot that you let me know! You have an awesome evening and week, Tony

  • @districtline
    @districtline Месяц назад

    I have an old one that looks just like yours. The junk man won't take it apart so I have to (haven't moved the sofa uet). I can see those rail things even when the sofa is upright. If removing screws is all there is to it, you just made my day ❤

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Truly blew my mind when I learned this. It is that easy and makes it light and manageable. Of course way after hauling and heaving several up stairs years later 😂 Have an awesome evening and week, Tony

  • @miasmith268
    @miasmith268 Месяц назад

    Absolutely doesnt work. Stupid idea.

  • @carljohas7611
    @carljohas7611 Месяц назад

    Dumb ways to die

  • @1JPH
    @1JPH Месяц назад

    Thank you. I gotta do mine. Let me tell you it is so much easier to learn from a non mechanic. Because you hit the same problems I will and walk us through it. A mechanic wouldn’t even see it as a problem and so not even bother to mention the small details like you do. Thank you again. I’ll let you know how mine goes. I’m checking out “auto parts” right now. I want to get the same one you got and I don’t know what I’ll get if I go on Amazon and get some cheap thing missing some parts or whatever.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Thank you so much for this comment it means a lot! I made this video awhile ago and I believe the company has changed names unfortunately I can’t change it in the video 😂 To be honest it’s been a while since I’ve ordered anything from them. But it was definitely a good fit. I hope you get it done with no issues and you made my day. I read your comment to my wife and when someone takes the time to comment is awesome! Let me know if you can definitely how it went. Have an awesome week and take care, Tony

  • @frederickrueckert850
    @frederickrueckert850 Месяц назад

    What year backing plate?

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      I believe most everything is still 1970. Have an awesome day and take care, Tony

  • @lindagcharlotte2256
    @lindagcharlotte2256 Месяц назад

    Great to see a tutorial if this. It may be a simple task to some though it is new territory for others. Mine was the latter and it sure helped me. Thanks so much.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo Месяц назад

      Thank you so much for this wonderful comment! It means a lot to me when my videos help people. You have a awesome day and take care, Tony

  • @BraydenMuskwa
    @BraydenMuskwa 2 месяца назад

    thanks lol

  • @cheapbastard990
    @cheapbastard990 2 месяца назад

    You don't have to take the drive shaft loose.

  • @ryanfluck-rr4zy
    @ryanfluck-rr4zy 2 месяца назад

    Comment to help this guy.

  • @GG-sb8fd
    @GG-sb8fd 2 месяца назад

    I had to lay a rubber piece on the pulley to keep strap from slipping but it worked like a charm! I had to put 185lbs. Of torque on my Tacoma and I almost couldn’t do it😂

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      AWESOME!!! I am so glad you got it!!! Thank you for letting me know it worked for you with adding the rubber piece with it. Have an amazing week and take care, Tony

  • @smokineaglesrodshop
    @smokineaglesrodshop 2 месяца назад

    I'm here to report back on the big block crank bolt. book said 200 ft/lbs min. I used a ratchet strap around the frame and through the hook to attach it to the frame tgen wrapped it around the crank pulley and through the fan and pwr steering belts 3 times. I had someone pull on the strap while I ran the torque wrench. the crank turned about 90 degrees then tightened up good and i got it done! seemed like it didn't wanna happen but 210 ft/lbs is a hell of alot. Thanks for the advice it really helped out on Carmen Electra225!! 🫡😎

  • @danwesson1934
    @danwesson1934 2 месяца назад

    Same process for the T2200? Great video and thanks for your time.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Thank you for taking the time to comment it means a lot. I hope you have an awesome week and take care, Tony

  • @smokineaglesrodshop
    @smokineaglesrodshop 2 месяца назад

    I'll give this a shot tomorrow and report back. gotta torque the balancer on my 71 buick 455 to 200lbs min!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Damn!!! That’s one heck of a lot of torque. If I stood on the torque wrench I wouldn’t have enough azz!! 😂 I hope you are successful with this method. Some people in comments added a piece of rubber tubing laying around. I would try to use as many wraps as you can even if you have to add another strap to lock it if it starts to spin. Sometimes it will have to spin some until the wraps tighten so don’t give up if it spins some. I am looking forward to your update. Take care, Tony

  • @pauldoan180
    @pauldoan180 2 месяца назад

    Thanks for the video

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      You’re welcome nothing more aggravating than adhesive glue on your stuff. Have a great weekend ahead, Tony

  • @angelaburns9908
    @angelaburns9908 2 месяца назад

    Thank you so much for this video,seen another guy on youtube hammering nails in copper but his video was not so good and at the end you were none the wiser as to how it worked. However this video was excellent thank you !!!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Thank you for your comment it always means a lot to me. I hope you have a excellent day and weekend ahead, Tony

  • @raginroadrunner
    @raginroadrunner 2 месяца назад

    Thank you. Very helpful video.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      You are so welcome and the comment means a lot to me. Have a wonderful evening, Tony

  • @kimthompson1088
    @kimthompson1088 2 месяца назад

    How do you know how much it is overfilled?

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Hello the best way is by your dipstick take some out and check it and repeat. If you put a whole quart in and it is way over try taking 8 ounces out at a time. Read the dipstick for cold or hot reading. It is a pain but a lot easier than trying to drop the pan and leaking it all out. I hope this helps you and have a awesome evening, Tony

  • @iceroad416
    @iceroad416 2 месяца назад

    Thanks

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      You are very welcome and thank you for the comment. I hope you are having an awesome weekend, Tony

  • @josh747
    @josh747 2 месяца назад

    Good video. I've changed the oil before in my lawn tractor, but never had to change out an oil filter. The video helped a lot. Thanks.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Thank you I am so happy and grateful for the comment. Hope you have a great weekend coming up, Tony

  • @hitenpatel1880
    @hitenpatel1880 2 месяца назад

    Hi, Changed the battery but the AC still not kicking on. Also, the Warning Triangle is still there. Any suggestions.

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Sorry for late response. It definitely sounds like another problem. I am not an a/c person. I googled it for you and there is so many different things it can be. Some sound simple and some will require a a/c technician. So sorry I can’t give good advice on your situation. 😢

  • @chrisward7038
    @chrisward7038 2 месяца назад

    This tip helped me out of a hole today. Thank you! I needed to wrap the pulley with a bicycle inner tube first to get grip

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Awesome!!! Thank you for letting me know. Have an amazing day, Tony

  • @philips1380
    @philips1380 2 месяца назад

    Worked like a charm!

    • @HowYouCanDoItToo
      @HowYouCanDoItToo 2 месяца назад

      Awesome!!! Thank you for letting me know. Have an amazing day